编辑：安装时要非常小心——不要下载NLS以外的其他插件。我以前安装过DYNAMICS版本，不保证ASSiGN版本！

如果您觉得需要安装9r2是先安装NLS，然后安装Dynamics/Assign版本，然后将提供的文件放入/Applications/Waves/Waves插件中

NLS通道/总线控制*Studio设置控制台类型。*驱动器控制谐波失真量，增加输入信号并减小内部净空。*输出/微调控制增益调节。*VCA组将NLS实例分配给VCA组，以便通过VCA组控制台进行全局控制。*链接在双声道模式和立体声模式之间切换，双声道模式下的左声道和右声道不是相同的型号，立体声模式下的左右声道是相同的。（仅限NLS立体声频道）*通过模拟麦克风输入电平来控制净空。（仅限NLS频道）*旁路可消除模拟谐波、噪声和频率响应效应。*噪声激活建模的模拟噪声。*VCA选项卡显示和隐藏VCA组控制台部分。*仪表显示输出信号峰值dBFS值。

*自动启用VCA组控制台的自动写入和读取。*组绕过分配给该VCA组的所有实例的NLS效果。*组噪波控制分配给该VCA组的所有NLS实例的噪波。*Group Drive为分配给该VCA组的所有NLS实例设置驱动器偏移值。*组微调为分配给该VCA组的所有NLS实例设置输出增益偏移值。*Group Studio为分配给该VCA组的所有NLS实例设置工作室类型。*组名称一个文本字段，允许您自定义每个VCA组的名称。

EDIT: BE very cautious with this installation – don’t download other plug-ins than NLS. I had installed DYNAMICS release before, no guarantee for ASSiGN release!If you feel the Need to install 9r2 is Install NLS first, then install either Dynamics/Assign version, then drop the file that’s provided, into /Applications/Waves/Waves Plug-insNLS Channel/Buss Controls* Studio sets the console type.* Drive controls the amount of harmonic distortion, increasing the input signal and decreasing the internal headroom.* Output / Trim controls gain adjustment.* VCA Group assigns the NLS instance to a VCA Group, for global control via the VCA Groups Console.* Link toggles between Dual Mono mode, where the left and right channels are not identical models, and Stereo mode, where left and right are identical.(NLS stereo Channel only)* Mic the headroom by simulating mic input levels. (NLS Channel only)* Bypass deactivates analog harmonics, noise and frequency response effects.* Noise activates modeled analog noise.* VCA Tab shows and hides the VCA Groups Console section.* Meter displays output signal peak dBFS values.VCA Group Console Controls* Auto enables automation writing and reading for the VCA Groups Console.* Group Bypass the NLS effect on all instances assigned to that VCA Group.* Group Noise controls the noise for all the NLS instances assigned to that VCA Group.* Group Drive sets the drive offset value for all NLS instances assigned to that VCA Group.* Group Trim sets the output gain offset value for all NLS instances assigned to that VCA Group.* Group Studio sets the studio type for all NLS instances assigned to that VCA Group.* Group Name a text field which allows you to customize the name of each VCA Group.

支持系统：MAC

文件大小：25MB